Kennel Gear Brand, .5" Bar Mount System with Extended Lever

½" Extended Lever Dog Kennel Bar Mount System — Piranha Lox® Bar Mount with Gloved Hand Release for Working Kennels, Boarding Facilities, and K-9 Operations

The Kennel Gear ½" Bar Mount System with Extended Lever is the Piranha Lox® dog kennel bar mount designed for working conditions where standard release tabs are difficult to operate. The extended lever adds a larger, raised contact surface to the spring-loaded release mechanism — making it straightforward to disengage a mounted bowl or pail with a single push, whether working bare-handed in a tight spot or running a full kennel round in heavy gloves. The bar mount clamps to welded wire kennel panels and transport crate doors without tools or permanent modification.

Key Features

• Piranha Lox® extended lever dog kennel bar mount system — accepts the insert block built into all compatible Kennel Gear bowls, pails, and other accessories; extended lever release tab provides a raised, unambiguous contact point for single-push disengagement with or without gloves
• Attaches to vertical or horizontal kennel bars — fits 2.00" x 4.00" welded wire kennel panels, transport crate doors, and commercial and veterinary kennel bar systems without drilling or structural modification
• 2 5/8" clearance between thumbscrews — covers bar diameters common to standard welded wire and commercial kennel panel installations
• Two 0.75" stainless steel thumbscrews — mount slides and repositions along the bar to set the right height for any dog or kennel configuration
• Anodized aluminum construction — resists corrosion through the repeated cleaning cycles of commercial boarding, veterinary, and K-9 facility environments
• Compatible with all Kennel Gear universal insert mounts — bowls with yokes, pails with insert blocks, IV poles, supply caddies, and any accessory with a compatible insert block

The practical advantage of the extended lever shows up most clearly in high-frequency service environments — a handler pulling and replacing pails across a full row of welded wire runs, a veterinary technician managing water access in a recovery ward, or a K-9 officer servicing a transport crate between operational legs. In each case the extended tab gives a definite, unambiguous point of contact that standard tabs lack when hands are covered or when the mount is positioned low on the bar.

For installations where the standard release tab is sufficient, see the ½" Bar Mount System. For chain link fence installations, see the dedicated Chain Link Fence Mount. Compatible accessories include the 4 Quart Stainless Steel Pail with Insert Block and the full range of Kennel Gear stainless steel bowl and pail systems. For full hardware fit and compatibility details, refer to the Kennel Gear System Fit and Compatibility Guide.

What’s Included

• ½" anodized aluminum extended lever dog kennel bar mount with spring-loaded extended release tab
• Two 0.75" stainless steel thumbscrews

Dimensions

• 3.125" L x 2.00" H x 0.625" D