Kennel Gear Brand, 4 Quart Stainless Steel Pail with .75" Bar Mount System

4 Quart Stainless Steel Dog Kennel Water Pail — ¾" Bar Mount for Boarding Facilities, Veterinary Wards, and Fixed Kennel Installations

The 4 Quart Stainless Steel Pail with ¾" Bar Mount System is a mounted dog water pail built for medium to large dogs in fixed kennel environments where a standard ½" mount doesn’t provide enough clearance. The ¾" bar mount extends the pail further from the mounting surface, clearing obstructions above the mount point and improving access in kennel panel and run configurations where a flush installation would be blocked or difficult to service. Same Piranha Lox® locking system, same 4 quart stainless steel pail — with the standoff distance that constrained installations require.

Key Features

• 4 quart capacity stainless steel dog kennel water pail — sized for medium to large dogs in boarding runs, veterinary wards, and fixed kennel installations where extended watering intervals are a daily operational reality
• ¾" bar mount extends the mounted dog water pail further from the mounting surface — improves clearance in tight configurations and clears obstructions above the mount point that would interfere with a standard ½" installation
• Piranha Lox® locking technology — insert block attached directly to the pail engages with the surface mount on the bar mount system for a secure, tool-free lock and release
• Deep pail design with a narrower opening than a standard bowl — minimizes spillage in active kennel runs and keeps water accessible between staff rounds
• Elevated mounting positions water off the kennel floor — away from soiled bedding, debris, and waste accumulation
• Food-grade stainless steel construction — corrosion resistant, odor resistant, and built for the demands of daily commercial use
• Dishwasher safe — compatible with commercial dishwashers used in boarding and veterinary facilities
• Ships complete with pail and ¾" bar mount system (includes two 0.75" thumbscrews)

When frame rails, door hardware, or panel overlaps sit directly above a mount point, the additional standoff distance of the ¾" mount resolves the clearance problem without any modification to the kennel structure. The Piranha Lox® insert block seats flush on the surface mount, locks the dog kennel water pail without play, and gives staff clean access for refilling and removal — the same fast, repeatable process as any Kennel Gear installation, now accessible in configurations where the standard mount falls short.

At four quarts, this mounted dog water pail gives boarding staff and veterinary teams the water buffer they need to get through a full day without running a medium to large dog dry between rounds. The stainless steel construction holds its finish through repeated disinfection cycles — no surface degradation, no retained odor between kennel occupants, no material breakdown from daily commercial dishwasher use.

Need a spare for back-to-back kennel turnovers or want to expand an existing ¾" mount setup? The 4 Quart Stainless Steel Pail with Insert Block (mount not included) is available separately. For full hardware fit and engagement specifications, refer to the Kennel Gear System Fit and Compatibility Guide.

What’s Included

• 4 quart food-grade stainless steel pail with integrated Piranha Lox® insert block
• ¾" bar mount system (includes two 0.75" thumbscrews)

Pail Dimensions (pail only)

• 7.50" W x 7.00" H

Approximate Dimensions (pail and mount installed)

• 9.00" L x 9.50" W x 7.00" H