Kennel Gear Brand, 1 Pint Double Stainless Steel Bowl with Aluminum Yoke, .5" Surface Mount and Adhesive Backing

Key Features

• Dual 1 pint bowls in a single wall-mounted unit — food and water on one compact footprint
• Dual-method ½" surface mount — installs with 3M™ High Strength Acrylic 300LSE adhesive backing or two countersunk screws for permanent installation into wood and screw-accepting surfaces
• No bar required — compatible with kennel walls, veterinary run panels, glass, stainless steel, plastic, and aluminum surfaces
• Food-grade stainless steel bowls — dishwasher safe, non-porous, corrosion and odor resistant
• Single aluminum yoke holds both bowls — engages with Piranha Lox® surface mount hardware, releases tool-free
• Compatible with existing Kennel Gear USA Piranha Lox® installations
• Ships complete with two stainless steel bowls, aluminum yoke, and ½" surface mount with adhesive backing
• Note: The aluminum yoke is not designed for dogs that apply excessive downward force to the mounted bowls. For those applications, a stainless steel yoke system is recommended.

Food and water. One mount. Minimal wall space. The 1 Pint Double Stainless Steel Bowl System with Surface Mount is designed for kennel walls, veterinary run panels, and other smooth flat surfaces where bar mounting isn't an option and floor space is too valuable to give up to freestanding bowls. Both 1 pint food-grade stainless steel bowls are held in a single aluminum yoke — keeping the feeding station organized and the surrounding area clean.

The ½" surface mount plate gives installers two options: peel-and-press bonding with 3M™ High Strength Acrylic 300LSE adhesive for non-porous smooth surfaces, or countersunk screw installation into wood, composite panels, or any screw-accepting material indoors or out. Either way, Piranha Lox® locking technology holds the yoke and bowls securely in position once the mount is set. The full yoke-and-bowl assembly lifts off as a single unit without tools for cleaning or refilling — an advantage in busy boarding facilities and veterinary environments where time between uses matters.

This system integrates seamlessly with existing Kennel Gear USA Piranha Lox® configurations, so surface-mount feeding stations can be added alongside current bar mount setups without replacing existing hardware. For adhesive installations, apply to a thoroughly cleaned, dry surface between 70°F and 100°F, press firmly for 20 seconds, and allow a minimum of one hour before placing in service. For complete surface preparation, pressure, and cure schedule guidance, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions. Confirm surface and hardware compatibility using the Kennel Gear System Fit and Compatibility Guide before ordering.

Already have a mount installed? The 1 Pint Double Stainless Steel Bowl with Aluminum Yoke is available separately — mount not included.

What's Included

• Two 1 pint food-grade stainless steel dog bowls
• Aluminum yoke with integrated Piranha Lox® insert block
• ½" surface mount plate with 3M™ High Strength Acrylic 300LSE adhesive backing and countersunk screw holes

Approximate Dimensions

7.00" L × 12.00" W × 2.50" H

Application Instructions

• Adhesive installation: Clean and dry the mounting surface thoroughly. Apply at surface temperatures between 70°F and 100°F. Press firmly for a minimum of 20 seconds. Allow at least one hour before placing the bowl system in service.
• Screw installation: Align the mount plate on the surface and drive screws through the two countersunk holes into wood or other screw-accepting material.

For complete adhesive installation guidance including surface preparation, pressure requirements, and full cure schedule, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions.

Adhesive Use Disclaimer

Product Use: All statements, technical information, and data contained in this document are based upon tests or experience that 3M and Kennel Gear USA LLC believe are reliable. However, many factors beyond 3M's and Kennel Gear USA LLC's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M's and Kennel Gear USA LLC's control and uniquely within the user's knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for the user's method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M and Kennel Gear USA LLC warrant that each 3M product meets the applicable 3M product specification at the time 3M or Kennel Gear USA LLC ships the product. 3M AND KENNEL GEAR USA LLC MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

Limitation of Liability: Except where prohibited by law, 3M and Kennel Gear USA LLC will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.