Kennel Gear Brand, .5 Pint Stainless Steel Bowl with Aluminum Yoke, .5" Surface Mount and Adhesive Backing

Key Features

• No-drill installation — ½" surface mount plate bonds to kennel walls, stainless steel panels, glass, and aluminum surfaces
• 3M™ High Strength Acrylic 300LSE adhesive backing — peel, press, and the mount is set
• Compact .5 pint capacity — sized for small dogs, puppies, cats, parrots, and portion-controlled feeding
• Food-grade stainless steel bowl — dishwasher safe, odor resistant, non-porous
• Piranha Lox® locking technology holds the bowl firmly — releases one-handed without tools
• Ships complete with bowl, aluminum yoke, and ½" adhesive surface mount

A no-drill stainless steel dog bowl mounting solution for professional and home environments where bar mounting isn't practical. The ½" surface mount plate adheres directly to smooth flat surfaces — kennel walls, stainless steel panels, glass, and aluminum — using 3M™ High Strength Acrylic 300LSE adhesive backing. No hardware, no holes, no surface damage. Peel the backing, press firmly for 20 seconds, and the mount is in position.

Once set, Piranha Lox® locking technology holds the aluminum yoke and bowl against the plate with the same dependable engagement found across the Kennel Gear USA product line. The bowl stays fixed through feeding, kennel activity, and transport — and detaches in a single clean motion for washing or refilling. In high-volume boarding facilities, veterinary recovery areas, and grooming bays where throughput matters, that kind of efficiency adds up quickly.

Allow a minimum of one hour after application before putting the mount into service, and apply at surface temperatures between 70°F and 100°F for optimal adhesive performance. For complete surface preparation, pressure, and cure time guidance, review the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions. The food-grade stainless steel bowl is dishwasher safe and built to handle the sanitation demands of daily commercial use. For alternative mounting configurations, review the Kennel Gear System Fit and Compatibility Guide to confirm compatibility before ordering.

Already have a mount in place? The .5 Pint Stainless Steel Bowl with Aluminum Yoke is available separately — mount not included.

What's Included

• .5 Pint food-grade stainless steel dog bowl
• Precision-fit aluminum yoke with integrated Piranha Lox® insert block
• ½" surface mount plate with 3M™ High Strength Acrylic 300LSE adhesive backing

Approximate Dimensions

5.50" L × 6.75" W × 2.50" H

Application Instructions

• Clean and dry the mounting surface thoroughly before application
• Apply at surface temperatures between 70°F and 100°F
• Press firmly for a minimum of 20 seconds
• Allow at least one hour before placing the bowl system in service

For complete installation guidance including surface preparation, pressure requirements, and full cure schedule, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions.

Adhesive Use Disclaimer

Product Use: All statements, technical information, and data contained in this document are based upon tests or experience that 3M and Kennel Gear USA LLC believe are reliable. However, many factors beyond 3M's and Kennel Gear USA LLC's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M's and Kennel Gear USA LLC's control and uniquely within the user's knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for the user's method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M and Kennel Gear USA LLC warrant that each 3M product meets the applicable 3M product specification at the time 3M or Kennel Gear USA LLC ships the product. 3M AND KENNEL GEAR USA LLC MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

Limitation of Liability: Except where prohibited by law, 3M and Kennel Gear USA LLC will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.