Kennel Gear Brand, Standard Vertical IV Pole Double Hook System

Standard Vertical IV Pole Double Hook System — Kennel Gear Veterinary IV Pole for Kennel Bars, Operating Tables, and Gurneys

The Kennel Gear Standard Vertical IV Pole Double Hook System is an aluminum veterinary IV pole with two stainless steel hooks that ships with a .5" Piranha Lox® bar mount system — supporting two active IV lines simultaneously as the patient transitions from surgical suite to recovery kennel without either bag being disturbed. Made in the USA.

Key Features

• Kennel Gear vertical IV pole with Piranha Lox® locking technology — integrated insert block locks into any compatible Kennel Gear mount and holds without tools; lift to release and move to the next station without touching either IV line
• Ships with .5" bar mount system — secures to vertical kennel bars in the recovery ward without tools or permanent modification to the kennel structure
• Two stainless steel IV hooks — each set approximately 6" out from the pole, giving both bags independent clearance to hang fully loaded without contact with the pole or mounting hardware
• Height adjustment from 15" to 28" — spans the full range of animal sizes from small breed to large, across both recovery and surgical clinical settings
• Aluminum pole with stainless steel hooks — the two-hook configuration handles complex procedures where separate fluid types or rates must run concurrently without cross-contamination risk
• Transfers between all Kennel Gear mounting options — position surface mounts or bar mount systems at each patient station; the IV pole moves between them with the patient at every handoff
• Made in the USA

In procedures where two fluid lines must run from the start of surgery through the full recovery period, the Kennel Gear double hook vertical IV pole eliminates the need to reconfigure the IV setup at any patient transition point. Both hooks are loaded at the surgical suite; the pole locks into the bar mount in the recovery kennel when the patient arrives and stays locked through the recovery period. If the patient needs to move again — back to treatment, to a different kennel, or to a gurney — the pole releases and relocates in one motion without touching either line. For fixed installations where a bar mount is not the right fit, the included surface mount can be fastened permanently to a kennel panel, gurney rail, or table surface using buyer-supplied fasteners; the buyer is responsible for fastener selection and confirming the surface can safely support the pole and the combined weight of two loaded IV bags.

For the single line configuration, see the Standard Vertical IV Pole Single Hook System. For full mount and compatibility details, refer to the Kennel Gear System Fit and Compatibility Guide.

What's Included

• Aluminum IV pole with two stainless steel hooks
• .5" anodized aluminum bar mount system with .75" stainless steel thumbscrews

Approximate Dimensions

• Pole height adjustment: 15" to 28"
• Hook extension: approximately 6" from pole