Kennel Gear Brand, 1 Quart Stainless Steel Bowl with Aluminum Yoke, .5" Surface Mount and Adhesive Backing

Key Features

• 1 quart capacity — higher-volume feeding and watering for medium to large dogs without constant refilling
• Dual-method ½" surface mount — installs with 3M™ High Strength Acrylic 300LSE adhesive backing or two vertically aligned countersunk screws for permanent installation into wood and screw-accepting surfaces
• No bar required — bonds to glass, stainless steel, plastic, and aluminum surfaces
• Food-grade stainless steel bowl — dishwasher safe, non-porous, corrosion and odor resistant
• Piranha Lox® locking technology — aluminum yoke engages securely with surface mount plate, releases tool-free
• Compatible with existing Kennel Gear USA Piranha Lox® installations
• Ships complete with bowl, aluminum yoke, and ½" surface mount with adhesive backing
• Note: The aluminum yoke is not designed for dogs that apply excessive downward force to the mounted bowl. For those applications, a stainless steel yoke system is recommended.

A quart-capacity no-drill stainless steel dog bowl system for medium to large dogs in veterinary recovery kennels, grooming stations, boarding facilities, and wall-mounted home setups where a bar mount isn't available and capacity matters. The ½" surface mount plate gives installers two options: 3M™ High Strength Acrylic 300LSE adhesive bonding for smooth non-porous surfaces, or permanent screw installation through two vertically aligned countersunk holes into wood, composite panels, or any screw-accepting material.

Once the mount is in place, Piranha Lox® locking technology secures the aluminum yoke and bowl against the plate through feeding and routine kennel activity. The bowl detaches in a single tool-free motion for cleaning or refilling — and the quart capacity means fewer interruptions per animal in busy environments where workflow efficiency directly affects how many dogs a facility can handle in a day. The food-grade stainless steel bowl is dishwasher safe and built to handle repeated commercial sanitation cycles without corrosion, odor retention, or surface degradation.

This system is fully compatible with existing Kennel Gear USA Piranha Lox® configurations. For adhesive installations, apply to a thoroughly cleaned, dry surface between 70°F and 100°F, press firmly for 20 seconds, and allow a minimum of one hour before placing in service. For complete surface preparation, pressure, and cure schedule guidance, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions. Confirm surface and hardware compatibility using the Kennel Gear System Fit and Compatibility Guide before ordering.

Already have a mount installed? The 1 Quart Stainless Steel Bowl with Aluminum Yoke is available separately — mount not included.

What's Included

• 1 Quart food-grade stainless steel dog bowl
• Precision-fit aluminum yoke with integrated Piranha Lox® insert block
• ½" surface mount plate with 3M™ High Strength Acrylic 300LSE adhesive backing and two vertically aligned countersunk screw holes

Approximate Dimensions

6.50" L × 7.75" W × 2.50" H

Application Instructions

• Adhesive installation: Clean and dry the mounting surface thoroughly. Apply at surface temperatures between 70°F and 100°F. Press firmly for a minimum of 20 seconds. Allow at least one hour before placing the bowl system in service.
• Screw installation: Align the mount plate on the surface and drive screws through the two vertically aligned countersunk holes into wood or other screw-accepting material.

For complete adhesive installation guidance including surface preparation, pressure requirements, and full cure schedule, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions.

Adhesive Use Disclaimer

Product Use: All statements, technical information, and data contained in this document are based upon tests or experience that 3M and Kennel Gear USA LLC believe are reliable. However, many factors beyond 3M's and Kennel Gear USA LLC's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M's and Kennel Gear USA LLC's control and uniquely within the user's knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for the user's method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M and Kennel Gear USA LLC warrant that each 3M product meets the applicable 3M product specification at the time 3M or Kennel Gear USA LLC ships the product. 3M AND KENNEL GEAR USA LLC MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

Limitation of Liability: Except where prohibited by law, 3M and Kennel Gear USA LLC will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.