Kennel Gear Brand, 1 Pint Stainless Steel Bowl with Aluminum Yoke, .5" Surface Mount and Adhesive Backing

Key Features

• 1 pint capacity — suitable for small to medium dogs in kennel, crate, and facility environments
• Dual-method ½" surface mount — installs with 3M™ High Strength Acrylic 300LSE adhesive backing or two countersunk screws for permanent wood and screw-accepting surface installation
• No bar required — bonds to glass, stainless steel, plastic, aluminum, and smooth flat surfaces
• Food-grade stainless steel bowl — dishwasher safe, non-porous, odor and corrosion resistant
• Piranha Lox® locking technology — bowl seats firmly, releases tool-free in one motion
• Compatible with existing Kennel Gear USA Piranha Lox® installations
• Ships complete with bowl, aluminum yoke, and ½" surface mount with adhesive backing
• Note: The aluminum yoke is not designed for dogs that apply excessive downward force to the mounted bowl. For those applications, a stainless steel yoke system is recommended.

A versatile no-drill stainless steel dog bowl system for professional and home installations where bar mounting isn't an option — and where a single mounting method isn't enough. The ½" surface mount plate gives you two paths to a secure installation: peel-and-press adhesive bonding using 3M™ High Strength Acrylic 300LSE for smooth non-porous surfaces, or countersunk screw mounting into wood, composite panels, or any screw-accepting surface indoors or out.

Once the mount is set, Piranha Lox® locking technology holds the aluminum yoke and 1 pint bowl firmly against the plate. The bowl stays put through active feeding conditions and daily kennel use, and releases cleanly in one motion when it's time to clean or swap — no tools involved at any stage. The food-grade stainless steel construction handles repeated dishwasher cycles without degrading, and the non-porous surface gives odor and bacteria no foothold between cleanings.

This system is fully compatible with existing Kennel Gear USA Piranha Lox® setups, making it straightforward to expand a current installation without replacing existing hardware. For adhesive installations, apply to a clean, dry surface between 70°F and 100°F, press firmly for 20 seconds, and allow a minimum of one hour before use. For complete surface preparation, pressure, and cure time guidance, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions. Confirm hardware and surface compatibility using the Kennel Gear System Fit and Compatibility Guide before ordering.

Already have a mount in place? The 1 Pint Stainless Steel Bowl with Aluminum Yoke is available separately — mount not included.

What's Included

• 1 Pint food-grade stainless steel dog bowl
• Precision-fit aluminum yoke with integrated Piranha Lox® insert block
• ½" surface mount plate with 3M™ High Strength Acrylic 300LSE adhesive backing and countersunk screw holes

Approximate Dimensions

7.00" L × 5.25" W × 2.50" H

Application Instructions

• Adhesive installation: Clean and dry the mounting surface thoroughly. Apply at surface temperatures between 70°F and 100°F. Press firmly for a minimum of 20 seconds. Allow at least one hour before placing the bowl system in service.
• Screw installation: Align the mount plate on the surface and drive screws through the two countersunk holes into wood or other screw-accepting material.

For complete adhesive installation guidance including surface preparation, pressure requirements, and full cure schedule, see the 3M™ High Strength Acrylic Adhesive 300LSE Installation Instructions.

Adhesive Use Disclaimer

Product Use: All statements, technical information, and data contained in this document are based upon tests or experience that 3M and Kennel Gear USA LLC believe are reliable. However, many factors beyond 3M's and Kennel Gear USA LLC's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M's and Kennel Gear USA LLC's control and uniquely within the user's knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for the user's method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M and Kennel Gear USA LLC warrant that each 3M product meets the applicable 3M product specification at the time 3M or Kennel Gear USA LLC ships the product. 3M AND KENNEL GEAR USA LLC MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

Limitation of Liability: Except where prohibited by law, 3M and Kennel Gear USA LLC will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.