1 Pint Double Stainless Steel Bowl with Aluminum Yoke

Two Bowls. One Yoke. Ready to Drop Into Your Existing Kennel Gear Piranha Lox® Installation.

The 1 Pint Double Stainless Steel Bowl with Aluminum Yoke is the complete two-bowl assembly — both stainless steel bowls and the aluminum yoke — for the double bowl configuration in the Kennel Gear Piranha Lox® system. It fits any compatible mount already in place and is ready to engage without tools, modifications, or additional hardware. Whether one bowl is damaged, the yoke needs replacing, or you're adding a dedicated food-and-water station to an existing installation, this is the assembly to order. Mount not included.

Will This Fit My Current Setup?

This double bowl and yoke assembly is compatible with Kennel Gear USA Piranha Lox® mounting hardware configured for the 1 pint double bowl. Verify fit against your existing hardware using the Kennel Gear System Fit and Compatibility Guide before ordering. Need the complete system with mount? See the 1 Pint Double Stainless Steel Bowl with Aluminum Yoke System.

Key Features

• Complete double bowl replacement assembly — two 1 pint stainless steel bowls and aluminum yoke, ready to engage with compatible Piranha Lox® mount hardware
• Dedicated food and water on a single yoke — no second mount needed, no additional wall space required
• Food-grade stainless steel bowls — non-porous, corrosion resistant, odor resistant, and dishwasher safe
• Aluminum yoke with integrated Piranha Lox® insert block — full assembly locks into place and releases tool-free as one unit
• Mount not included — bowl and yoke assembly only
• Note: The aluminum yoke is not designed for dogs that stand on or apply excessive downward force to the mounted bowls. A stainless steel yoke is recommended for those animals.

Who Orders This Assembly

A boarding facility that runs double bowl setups across its kennel runs and needs spares cycling through so cleaning one doesn't pull the whole feeding station out of service. A K-9 handler whose transport vehicle already has the mount in place and needs a fresh assembly after field use. A dog owner who wants to add a dedicated water bowl alongside the food bowl already mounted in the crate — without installing a second mount. A veterinary ward adding a combined food-and-water station to a recovery kennel where a single mount is already set. In every case, the double yoke is what makes this the right assembly — both bowls move as one unit, clean as one unit, and reinstall as one unit.

What's Included

• Two 1 Pint food-grade stainless steel dog bowls
• Aluminum yoke with integrated Piranha Lox® insert block

Approximate Dimensions

6.50" L × 12.50" W × 2.50" H